China China Factory Belt Conveyor Drum Lining Ceramic Pulley Lagging Favourable Price Ceramic Guide Wire Drawing Conveyor Roller Coil Winder Pulley pulley and belt

Merchandise Description

Head Push Pulley, Return Pulley,Bend Pulley, Snub Pulley,Tensioning Pulley, Take up Pulley can be supplied. We are planning and manufacturing pulleys, employing components of the maximum quality in a manufacturing process employing advanced technology. This jointly with the application of the Quality Assurance method certifi ed to ISO 9001:2015, contributes to the production of high top quality items offering dependable, extended daily life functionality in the field and appreciably minimizing maintenance cost. Every single our conveyor pulley is individually computer designed to satisfy the client’s needs.

Product Identify

Belt Conveyor Pulley Drum

Sort

Drive Pulley, Bend Pulley,Snub Pulley,Consider Up Pulley

Duration

200mm-2500mm

Components

Carbon metal, Stainless metal, Rubber

Surface Treatment

Smooth, CZPT grooved lagging, Herringbone lagging, Ceramic lagging

Welding

Submerged Arc Welding

Bearing

Popular manufacturers

Framework

Tube,shaft,self-aligning bearing,bearing seat/residence,hub, locking bushing,finish disc

Generate Pulley Introduction:

one. Head/Travel Pulley is located at the discharge terminus of the conveyor. 
two. Generate pulley provides the driving force for the conveyor. In order to improve pulley lifestyle and traction, it usually has a greater diameter than other pulleys.
3. We can offer pulleys with very hot vulcanized rubber lagging, simple or grooved, as required by customer. Various patterns of grooving this sort of as herringbone or CZPT can be supplied to increase tractive friction below soiled or moist problems. CZPT grooves have the advantage of becoming set up in any orientation, irrespective of belt route.

Specification of Drive Head Pulley Drum

Belt Width 500-2800mm (19-a hundred and ten inch)
Pulley Length 500-3500mm (19-138 inch)
Diameter 200-1800mm (8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, JIS, AS/NS, and so forth.
Doing work Existence Far more than thirty,000 hours.
Area Flat Rubber Lagged, Ceramic Lagged, CZPT Rubber Lagged, and many others.
Main Substance Carbon Steel
Length of conveyor travel pulley is dependent on the width of conveyor Belt. You can get drive pulleys with very hot & chilly vulcanized rubber lagging, simple or grooved, as essential by consumer.

Bend Pulley Introduction:

1. The bend pulley  is employed for shifting the direction of the belt.
2. The bend pulley is typically set up at the tail element or the vertical just take-up equipment component when the belt course require to 180°bending. It will be installed previously mentioned the consider-up equipment portion whilst 90°bending.
3. The pulley, which is utilised for extending the speak to floor, is generally utilized for under or equivalent to 45 degree bending.
4. The floor therapy of the bend pulley can be smooth metal and flat rubber lagging. 

Specification of Bend Pulley:

Belt Width 500-2800mm(19-110 inch)
Pulley Length 500-3200mm(19-126 inch)
Diameter 200-1800mm(8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, and so forth.
Functioning Existence Much more than thirty,000 several hours.
Area Flat Rubber Lagged, Ceramic Lagged, CZPT Rubber Lagged, etc.
Principal Materials Carbon Steel
Length of conveyor bend pulley is dependent on the width of conveyor Belt. You can get generate pulleys with very hot vulcanized rubber lagging, simple or grooved, as necessary by consumer.

Snub Pulley
Snub pulley is utilized to achieve greater angle of wrap on the generate pulley thereby increasing the traction. It also minimizes the belt rigidity maximizing the life of the conveyor element.It is mounted near to the generate pulley on the return aspect of the belt.

Specification of Snub Pulley:

Objects Content material
Belt Width five hundred-2800mm (19-a hundred and ten inch)
Pulley Duration five hundred-3200mm (19-126 inch)
Diameter 200-1800mm (8-70 inch)
Normal ISO9001:2008, CEMA, DIN, TUV, and so forth.
Operating Lifestyle Much more than 30,000 several hours.
Surface area Flat Rubber Lagged, Ceramic Lagged, CZPT Rubber Lagged, and so on.
Primary Content Carbon Metal
Length of conveyor Snubpulley depends on the width of conveyor Belt. You can get Snubpulleys with hot vulcanized rubber lagging, basic or grooved, as necessary by shopper.

Just take Up Pulley 
The just take up pulley will ensure ample tension of the belt leaving the drive pulley so as to steer clear of any slippage of the belt, ensure correct belt pressure at the loading and other details along the conveyor, compensate for changes in belt size owing to elongation, and offer further size of belt when necessary for splicing objective.

Specification of just take up pulley drum:

Belt Width 500-2800mm(19-one hundred ten inch)
Pulley Size five hundred-3200mm(19-126 inch)
Diameter 200-1800mm(8-70 inch)
Common ISO9001:2008, CEMA, DIN, TUV, and many others.
Operating Existence A lot more than 30,000 hrs.
Surface area Flat Rubber Lagged, Ceramic Lagged, CZPT Rubber Lagged, and so forth.
Primary Materials Carbon Metal

The components of a pulley drum contain the following:

Drum or Shell The drum is the portion of the pulley in direct get in touch with with the belt. The shell is fabricated from possibly a rolled sheet of metal or from hollow steel tubing.The shell has a specific ‘face’ width and diameter which is established by the width of the belting and the sort and ranking of the belt to be utilised on the conveyor.
Diaphragm Plates The diaphragm or conclude plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at every conclude, to bolster the drum.The stop plates are bored in their centre to accommodate the pulley shaft and the hubs for the pulley locking factors.
Shaft The shaft is designed to accommodate all the used forces from the belt and / or the push unit, with minimal deflection.The shaft is situated and locked to the hubs of the finish discs by signifies of a locking components.
The shaft is supported on each finishes by bearings which are housed in plummer blocks, to assist the shaft and pulley assembly on the conveyor framework.
Shafts usually comprise different diameters along their length thanks to the bending moments and resultant deflection limits. The diameter of the shaft at the landings for the bearings may possibly be scaled-down to fulfill the required bearing diameter which is a lot more expense-efficient (smaller sized).
Likewise in the circumstance of a travel shaft, the drive attachment, may be various to the other diameters along the shaft and that’s why pulley shafts are typically stepped.
Locking Components These are substantial-precision produced things which are fitted in excess of the shaft and into the pulley hubs. The locking components connect the pulley firmly to the shaft by means of the finish plates.Locking components perform on the friction-grip theory whereby the factor is CZPT to be mounted to the shaft and hub concurrently and concentrically, by tightening a collection of screws all around the locking aspect.
Hubs The hubs are fabricated and machined housings which are welded into the conclude plates. The hubs are sized in accordance to the size of the pulley, the diameter of the shaft and the dimensions of the locking factor which is essential for the particular duty.
Lagging It is at times necessary or attractive to increase the friction in between the conveyor belt and the pulley in order to improve the torque that can be transmitted via a push pulley.Improved traction more than a pulley also helps with the education of the belt.
In this kind of cases pulley drum surfaces are ‘lagged’ or coated in a rubberized material. This cover is usually 8 mm to twelve mm thick and can be simple or have a grooved sample. The rubber lagging is vulcanized to the pulley shell to guarantee that it stays hooked up under adverse operating conditions.
Bearing Assemblies Bearings support the rotating shaft and hence the pulley. The bearings are housed in ‘plummer blocks’ which enable the mass of the pulley assembly furthermore the belt tension forces to be transmitted to the pulley supporting structure.Plummer blocks are often bolted to ‘sole plates’ which are welded to the composition.
The sole plates include jacking screws to allow the pulley to be properly and comparatively easily aligned.

Numerous varieties of bearing housing, seals and finish disc:

Pulley Drum Warehouse and package deal:

Pulley Drums:

Our Goods: Belt Conveyors, Pulley Drum, Conveyor Rollers Loafer,  etc.

Material: Stainless Steel
Surface Treatment: Polishing
Motor Type: Frequency Control Motor
Installation: Horizontal
Carrying Type: Light, Medium, Heavy
Light Connection Mode: The Shaft and Hub Are Single-Width Plate Welded Cy

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name
Belt Conveyor Pulley Drum
Type
Drive Pulley, Bend Pulley,Snub Pulley,Take Up Pulley
Length
200mm-2500mm
Materials
Carbon steel, Stainless steel, Rubber
Surface Treatment
Smooth, Diamond grooved lagging, Herringbone lagging, Ceramic lagging
Welding
Submerged Arc Welding
Bearing
Famous brands
Structure
Tube,shaft,self-aligning bearing,bearing seat/house,hub, locking bushing,end disc

###

Belt Width 500-2800mm (19-110 inch)
Pulley Length 500-3500mm (19-138 inch)
Diameter 200-1800mm (8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, JIS, AS/NS, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel
Length of conveyor drive pulley depends on the width of conveyor Belt. You can get drive pulleys with hot & cold vulcanized rubber lagging, plain or grooved, as required by client.

###

Belt Width 500-2800mm(19-110 inch)
Pulley Length 500-3200mm(19-126 inch)
Diameter 200-1800mm(8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel
Length of conveyor bend pulley depends on the width of conveyor Belt. You can get drive pulleys with hot vulcanized rubber lagging, plain or grooved, as required by client.

###

Items Content
Belt Width 500-2800mm (19-110 inch)
Pulley Length 500-3200mm (19-126 inch)
Diameter 200-1800mm (8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel
Length of conveyor Snubpulley depends on the width of conveyor Belt. You can get Snubpulleys with hot vulcanized rubber lagging, plain or grooved, as required by client.

###

Belt Width 500-2800mm(19-110 inch)
Pulley Length 500-3200mm(19-126 inch)
Diameter 200-1800mm(8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel

###

Drum or Shell The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing.The shell has a specific ‘face’ width and diameter which is determined by the width of the belting and the type and rating of the belt to be used on the conveyor.
Diaphragm Plates The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley shaft and the hubs for the pulley locking elements.
Shaft The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection.The shaft is located and locked to the hubs of the end discs by means of a locking elements.
The shaft is supported on both ends by bearings which are housed in plummer blocks, to support the shaft and pulley assembly on the conveyor structure.
Shafts often comprise different diameters along their length due to the bending moments and resultant deflection limitations. The diameter of the shaft at the landings for the bearings may be smaller to satisfy the necessary bearing diameter which is more cost-effective (smaller).
Similarly in the case of a drive shaft, the drive attachment, may be different to the other diameters along the shaft and hence pulley shafts are often stepped.
Locking Elements These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates.Locking elements work on the friction-grip principle whereby the element is able to be fastened to the shaft and hub simultaneously and concentrically, by tightening a series of screws around the locking element.
Hubs The hubs are fabricated and machined housings which are welded into the end plates. The hubs are sized according to the size of the pulley, the diameter of the shaft and the size of the locking element which is required for the specific duty.
Lagging It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley.Improved traction over a pulley also assists with the training of the belt.
In such cases pulley drum surfaces are ‘lagged’ or covered in a rubberized material. This cover is usually 8 mm to 12 mm thick and can be plain or have a grooved pattern. The rubber lagging is vulcanized to the pulley shell to ensure that it remains attached under adverse operating conditions.
Bearing Assemblies Bearings support the rotating shaft and hence the pulley. The bearings are housed in ‘plummer blocks’ which enable the mass of the pulley assembly plus the belt tension forces to be transmitted to the pulley supporting structure.Plummer blocks are often bolted to ‘sole plates’ which are welded to the structure.
The sole plates incorporate jacking screws to enable the pulley to be correctly and relatively easily aligned.
Material: Stainless Steel
Surface Treatment: Polishing
Motor Type: Frequency Control Motor
Installation: Horizontal
Carrying Type: Light, Medium, Heavy
Light Connection Mode: The Shaft and Hub Are Single-Width Plate Welded Cy

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name
Belt Conveyor Pulley Drum
Type
Drive Pulley, Bend Pulley,Snub Pulley,Take Up Pulley
Length
200mm-2500mm
Materials
Carbon steel, Stainless steel, Rubber
Surface Treatment
Smooth, Diamond grooved lagging, Herringbone lagging, Ceramic lagging
Welding
Submerged Arc Welding
Bearing
Famous brands
Structure
Tube,shaft,self-aligning bearing,bearing seat/house,hub, locking bushing,end disc

###

Belt Width 500-2800mm (19-110 inch)
Pulley Length 500-3500mm (19-138 inch)
Diameter 200-1800mm (8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, JIS, AS/NS, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel
Length of conveyor drive pulley depends on the width of conveyor Belt. You can get drive pulleys with hot & cold vulcanized rubber lagging, plain or grooved, as required by client.

###

Belt Width 500-2800mm(19-110 inch)
Pulley Length 500-3200mm(19-126 inch)
Diameter 200-1800mm(8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel
Length of conveyor bend pulley depends on the width of conveyor Belt. You can get drive pulleys with hot vulcanized rubber lagging, plain or grooved, as required by client.

###

Items Content
Belt Width 500-2800mm (19-110 inch)
Pulley Length 500-3200mm (19-126 inch)
Diameter 200-1800mm (8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel
Length of conveyor Snubpulley depends on the width of conveyor Belt. You can get Snubpulleys with hot vulcanized rubber lagging, plain or grooved, as required by client.

###

Belt Width 500-2800mm(19-110 inch)
Pulley Length 500-3200mm(19-126 inch)
Diameter 200-1800mm(8-70 inch)
Standard ISO9001:2008, CEMA, DIN, TUV, etc.
Working Life More than 30,000 hours.
Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.
Main Material Carbon Steel

###

Drum or Shell The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing.The shell has a specific ‘face’ width and diameter which is determined by the width of the belting and the type and rating of the belt to be used on the conveyor.
Diaphragm Plates The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley shaft and the hubs for the pulley locking elements.
Shaft The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection.The shaft is located and locked to the hubs of the end discs by means of a locking elements.
The shaft is supported on both ends by bearings which are housed in plummer blocks, to support the shaft and pulley assembly on the conveyor structure.
Shafts often comprise different diameters along their length due to the bending moments and resultant deflection limitations. The diameter of the shaft at the landings for the bearings may be smaller to satisfy the necessary bearing diameter which is more cost-effective (smaller).
Similarly in the case of a drive shaft, the drive attachment, may be different to the other diameters along the shaft and hence pulley shafts are often stepped.
Locking Elements These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates.Locking elements work on the friction-grip principle whereby the element is able to be fastened to the shaft and hub simultaneously and concentrically, by tightening a series of screws around the locking element.
Hubs The hubs are fabricated and machined housings which are welded into the end plates. The hubs are sized according to the size of the pulley, the diameter of the shaft and the size of the locking element which is required for the specific duty.
Lagging It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley.Improved traction over a pulley also assists with the training of the belt.
In such cases pulley drum surfaces are ‘lagged’ or covered in a rubberized material. This cover is usually 8 mm to 12 mm thick and can be plain or have a grooved pattern. The rubber lagging is vulcanized to the pulley shell to ensure that it remains attached under adverse operating conditions.
Bearing Assemblies Bearings support the rotating shaft and hence the pulley. The bearings are housed in ‘plummer blocks’ which enable the mass of the pulley assembly plus the belt tension forces to be transmitted to the pulley supporting structure.Plummer blocks are often bolted to ‘sole plates’ which are welded to the structure.
The sole plates incorporate jacking screws to enable the pulley to be correctly and relatively easily aligned.

The importance of pulleys

A pulley is a wheel that rides on an axle or axle. The purpose of the pulley is to change the direction of the tensioning cable. The cable then transfers the power from the shaft to the pulley. This article explains the importance of pulleys and demonstrates several different uses for this machine. Also, see the Mechanical Advantages section below for the different types. let’s start.
pulley

simple machine

A simple pulley machine is a device used to transfer energy. It consists of a wheel with flexible material on the rim and a rope or chain tied to the other end. Then lift the load using the force applied to the other end. The mechanical advantage of this system is one, as the force applied to the load is the same as the force on the pulley shaft.
A simple pulley machine has many benefits, from the ability to build pyramids to building modern buildings with it. Pulleys are also popular with children because they can perform simple tasks such as lifting toys onto a slide, sliding them off the slide, and lifting them up again. These activities, called “transportation” by child development theorists, allow them to learn about the physics of simple machines in the process.
The mechanism works by using cables to transmit force. The cable is attached to one side of the pulley and the other side is pulled by the user. Lift the load by pulling on one end and the other end of the rope. Simple pulley machines have many commercial and everyday applications, including helping move large objects. They can be fixed or movable, and can be a combination of both. The present invention is a great tool for any beginner or engineer.

axis

The axle wheel is the basic mechanical part that amplifies the force. It may have originally appeared as a tool to lift buckets or heavy objects from a well. Its operation is demonstrated by large and small gears attached to the same shaft. When applied to an object, the force on the large gear F overcomes the force W on the pinion R. The ratio of these two forces is called the mechanical advantage.
The ideal mechanical advantage of shaft pulleys is their radius ratio. A large radius will result in a higher mechanical advantage than a small radius. A pulley is a wheel through which a rope or belt runs. Often the wheels are interconnected with cables or belts for added mechanical advantage. The number of support ropes depends on the desired mechanical advantage of the pulley.
In the design of the axle wheel, the axle is the fulcrum and the outer edge is the handle. In simple terms, wheels and axle pulleys are improved versions of levers. The axle pulley moves the load farther than the lever and connects to the load at the center of the axle. Shaft pulleys are versatile and widely used in construction.

rope or belt

Ropes or pulleys are mechanical devices used to move large masses. The rope supports a large mass and can be moved easily by applying a force equal to one quarter of the mass to the loose end. Quad pulleys have four wheels and provide the mechanical advantage of four wheels. It is often used in factories and workshops. It is also a popular choice in the construction industry. If you are installing a pulley in your vehicle, be sure to follow these simple installation instructions.
First, you need to understand the basics of how a rope or pulley works. The machine consists of one or more wheels that rotate on an axle. The rope or belt is wrapped around the pulley and the force exerted on the rope is spread around the pulley. It then transfers the force from one end of the rope to the other. The pulley system also helps reduce the force required to lift objects.
Another common rope or pulley is the differential pulley. This is similar to a rope pulley, but consists of two pulleys of different radii. The tension in the two halves of the rope supports half the load that the live pulley should carry. These two different types of pulleys are often used together in composite pulley systems.
pulley

Mechanical advantage

The mechanical advantage is the ratio of the force used to move the load through the pulley system to the force applied. It has been used to measure the effectiveness of pulley systems, but it also requires assumptions about applied forces and weights. In a simple 1:1 pulley system, the weight lifting the weight is the same as the weight of the person pulling the weight. Adding mechanical advantage can help make up for the lack of manpower.
This advantage stems from the mechanical properties of simple machines. It requires less force and takes up less space and time to accomplish the same task. The same effect can also be achieved by applying less force at a distance. Furthermore, this effect is called the output force ratio. The basic working principle of a pulley system is a rope with a fixed point at one end. The movable pulley can be moved with very little force to achieve the desired effect.
The load can be moved through the vertical entry using a simple pulley system. It can use a simple “pulley block” system with a 2:1 “ladder frame” or a 4:1 with dual pulleys. This can be combined with another simple pulley system to create a compound pulley system. In this case, a simple pulley system is pulling another pulley, giving it a 9:1 mechanical advantage.

Commonly used

You’ve probably seen pulley systems in your kitchen or laundry room. You probably already use it to hang clothes on an adjustable clothesline. You may have seen motor pulleys in the kitchens of commercial buildings. You might even have seen one on a crane. These machines use a pulley system to help them lift heavy loads. The same goes for theaters. Some pulleys are attached to the sides of the stage, enabling the operator to move up and down the stage.
Pulley systems have many uses in the oil and petroleum industry. For example, in the oil and gas industry, pulley systems are used to lay cables. They are arranged in a pulley structure to provide mechanical energy. When the rope is running, two pulleys are hung on the derrick to facilitate smooth running. In these applications, pulleys are very effective in lifting heavy objects.
A pulley is a simple mechanical device that converts mechanical energy into motion. Unlike chains, pulleys are designed to transfer power from one location to another. The force required to lift an object with a pulley is the same as that required by hand. It takes the same amount of force to lift a bucket of water, but it’s more comfortable to pull sideways. A bucket of water weighs the same as when lifted vertically, so it’s easy to see how this mechanism can be useful.
pulley

Safety Notice

When using pulleys, you should take several safety precautions to keep your employees and other workers on the job site safe. In addition to wearing a hard hat, you should also wear gloves to protect your hands. Using pulleys can lead to a variety of injuries, so it’s important to keep these precautions in mind before using pulleys. Here are some of the most common:
Pulleys are an important piece of equipment to have on hand when lifting heavy objects. Pulleys not only reduce the force required to lift an object, but also the direction of the force. This is especially important if you are lifting heavy objects, such as a lawn mower or motorcycle. Before starting, it is important to make sure that the anchoring system can support the full weight of the object you are lifting.
When using a pulley system, make sure the anchor points are adequate to support the load. Check with the pulley manufacturer to determine the weight it can safely lift. If the load is too large, composite pulleys can be used instead. For vertical lifts, you should use a sprocket set and wear personal protective equipment. Safety precautions when using pulleys are critical to worker health and safety.

China China Factory Belt Conveyor Drum Lining Ceramic Pulley Lagging Favourable Price Ceramic Guide Wire Drawing Conveyor Roller Coil Winder Pulley     pulley and belt	China China Factory Belt Conveyor Drum Lining Ceramic Pulley Lagging Favourable Price Ceramic Guide Wire Drawing Conveyor Roller Coil Winder Pulley     pulley and belt
editor by czh 2022-12-23

Taper Lock Pulley

As one of the taper lock pulley manufacturers, suppliers, and exporters of mechanical products, We offer taper lock pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of taper lock pulley.

Recent Posts